Dip Switch Settings - Graco Reactor E-10hp Instructions Manual

Troubleshooting

DIP Switch Settings

To avoid electric shock, always unplug both power
cords before servicing Reactor and wait one minute.
1. Turn power off and unplug power cords from wall
outlets.
2. Remove screws and display cover (26).
26
3. Locate the DIP switch on the control board.
F . 6: DIP Switch
IG
4. Set DIP switches to the desired positions. See DIP
Switch Settings and Functions, page 31
5. Replace display cover (26) and plug in unit.
6. Cycle power switch to activate changes to DIP
switch.
30
ti21923a
332144E