Safety Precautions - SATO CL4NX Operator's Manual

Before You Start

Safety Precautions

This section describes how to operate the printer safely. Be sure to read and understand all the instructions
carefully before you install and use the printer.
Pictographic Symbols
This operator manual and the printer labels use a variety of pictographic symbols. These symbols show the
safe and correct operation of the printer and to prevent injury to others and property damage. The explanation
of the symbols is as follows.
The Warning symbol indicates that
you can cause death or serious
injury if you do not obey the instruc-
tion or procedure.
Warning
Example Pictographs
The pictograph means "Caution is required". The pictograph includes a
specified warning symbol (For example, the left symbol shows electric shock).
The pictograph means "Must not be done". The pictograph includes a specified
prohibited symbol (For example, the left symbol means "Disassembly
prohibited").
The pictograph means "Must be done". The pictograph includes a specified
mandate action symbol (For example, the left symbol means "Disconnect the
power plug from the outlet").
Put the printer on a stable area
• Put the printer on a stable area. Do not
put the printer on a wobbly table, slanted
area or an area subject to strong
vibration. If the printer falls off or topples,
it could cause injury to someone.
Do not put containers filled with liquid on the
printer
• Do not put flower vases, cups, or other
containers filled with liquids, on the
printer. If the liquid spilled and got into
the printer, immediately power off the
printer and disconnect the power plug
from the outlet. Then contact your SATO
reseller or technical support center. If
you operate the printer in this condition,
it could cause a fire or electric shock.
6
CL4NX Operator Manual
The Caution symbol indicates that
you can cause injury or property
damage if you do not obey the
Caution
instruction or procedure.
Warning
Do not put objects into the printer
• Do not put metal or flammable objects to
the printer's opening. If unwanted
objects got into the printer, immediately
power off the printer and disconnect the
power plug from the outlet. Then contact
your SATO reseller or technical support
center. If you operate the printer in this
condition, it could cause a fire or electric
shock.
Do not use other than the specified voltage
• Do not use other than the specified
voltage. Doing so could cause a fire or
electric shock.