Replacing The Print Head - SATO CL4NX Operator's Manual

7.6 Replacing the Print Head

You can easily remove and replace the damaged or worn down print head.
WARNING
• Do not touch the power button, connect or disconnect the power cord with wet hands. Doing so could cause
electric shock.
• Disconnect the power cord from the AC outlet before you replace the print head.
1
Make sure that the printer is in power off
mode, then disconnect the power cord
from the AC outlet.
2
Open the top cover.
CAUTION
• Open the top cover fully to prevent accidental drop of
the cover.
3
Turn the head lock lever  clockwise to
unlock the print head.
CAUTION
• The print head and its surrounding are hot after
printing. Be careful not to get burned.
• Touching the edge of the print head with bare hand
could cause injury.
7 Appendix
1
CL4NX Operator Manual
215