Monitoring > Packets > Received (Rx) - D-Link DSG-1100-10/ME Manual

D-Link DGS-1100-10/ME User Manual
Figure 4.119 - Monitoring > Packet s > Transmitted (TX) (table for Bytes and Packets)
The following fields can be set or viewed:
Time Interval: Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Record Number: Select the number of times the Switch will be polled between 20 and 200. The default
value is 200.
Bytes: Counts the number of bytes successfully sent from the port.
Packets: Counts the number of packets successfully sent on the port.
Unicast: Counts the total number of good packets that were transmitted by a unicast address.
Multicast: Counts the total number of good packets that were transmitted by a multicast address.
Broadcast: Counts the total number of good packets that were transmitted by a broadcast address.
Show/Hide: Check whether or not to display Bytes and Packets.
Clear: Click to clear all statistic counters on this window.
View Table: Click to display a table rather than a line graph.
View Line Chart: Click to display a line graph rather than a table.
Monitoring > Packets > Received (RX)
The Received (RX) page displays the following graph of packets received on the Switch. To select a port to
view these statistics for, use the Port drop-down menu. You may also use the real-time graphic of the Switch
at the top of the web page by clicking on a port.
7 7 2 2