Table of Contents
Advertisement
D-Link DGS-1100-10/ME User Manual
ID: Displays an incremented counter of the System Log entry. The Maximum entries are 500.
Time: Displays the time in days, hours, and minutes the log was entered.
Log Description: Displays the description of event recorded.
Severity: Displays a severity level of the event recorded.
Click Refresh to renew the page or click to delete all log entries.
Monitoring > Browse ARP Table
The Browse ARP Table page provides information regarding ARP VLANs, including which IP address was
mapped to what MAC address. To find a specific client, enter its IP address and select a type from the drop-
down menu, click Find. To clear the ARP Table, click Clear All.
Interface Name: Displays the name of ARP mappings.
IP Address: Displays the station IP address, which is associated with the MAC address.
MAC Address: Displays the MAC address associated with the IP address.
Type: Indicates how the MAC was assigned. The possible values are:
Dynamic – Indicates that the MAC address is dynamically created.
Static – Indicates the MAC address is a static IP address.
Port: Displays the ARP mapping ports.
Monitoring > Ethernet OAM > Browse Ethernet OAM Event Log
This window allows you to view the Ethernet OAM event log information. The Switch can buffer up to 1000
event logs. The event log will provide and record detailed information about each OAM event. Specify the
port number and port list you wish to view and click Find. To remove an entry, enter the appropriate
information and click Clear.
To view this window, click Monitoring > Ethernet OAM > Browse Ethernet OAM Event Log as shown
below:
Figure 4.129 - Monitoring > System Log
Figure 4.130 - Monitoring > Browse ARP Table
7
7
9
9
Hide quick links:
Advertisement
Table of Contents
