D-Link DGS-1100-10/ME User Manual
Figure 4.80 - Configuration > IGMP Snooping > Limited Multicast Range Settings
From Port / To Port: Select the port ranges to be configured.
Profile Type: Select IPv4 or IPv6.
Profile ID: Select the Profile ID.
Click Add to create the Profile ID with specified ports or click Delete to remove the ports.
Configuration > Multicast Forwarding & Filter > Max Multicast Group Settings
The Max Multicast Group Settings page allows you to configure the max multicast group for IGMP Snooping.
Figure4.81- Configuration > IGMP Snooping > Max Multicast Group Settings
From Port / To Port: Select the port ranges to be configured.
IP Type: Select IPv4 or IPv6.
Max Group (1-256): Select the Max Group to be configured.
Click Apply to implement changes made.
QoS > Traffic Control
The Traffic Control feature provides the ability to control the receive rate of broadcast, multicast, and
unknown unicast packets. Once a packet storm has been detected, the Switch will drop packets coming into
the Switch until the storm has subsided.
5
5
1
1