Adjusting Skew Feed - Konica Minolta BIZHUB C652 Installation Manual

3. Measure the values "a", "b" and "c" of the chart
and the sample copy.
When measuring the value 'a', use the sample
copies which printed in step 1 and 2.
4. Check to make sure that the difference of the
chart and the sample copy is within the specified
range.
Specifications a: 0 ± 2.0 mm for the first and the
second page
Specifications b: 0 ± 2.0 mm
Specifications c: 0 ± 1.0 mm
a
5. If the results do not fall within the specified range,
make adjustments by following the steps speci-
fied in "XIV. Adjusting skew feed" and "XV.
Adjusting the document stop position".
c
9J07IXE050DA
XIV. Adjusting skew feed
1. Close the reverse automatic document feeder.
2. Plug the power cord into the power outlet and
turn on the machine.
3. Check how the edges of the chart are misaligned.
The amount of the deviation of the chart will be X.
X
Deviation in + (plus)
4. Place the chart in the document feeding tray (with
the side having an arrow facing up).
5. Make copies 5 times repeatedly in single side
mode.
6. Fold all 5 sample copies as illustrated and check
for any deviation.
Deviation on the sample will be Y.
Deviation in + (plus)
E-15
X
Deviation in - (minus)
Y Y
Deviation in - (minus)
9J07IXC043DA
A01HIXC011DC
9J07IXC043DA