Adjusting The Anti-Scalp Rollers; Positioning The Seat; Changing The Seat Suspension - Toro 74891 Operator's Manual

2
1
1. Deck-lift pedal
2. Handle
Adjusting the Anti-Scalp
Rollers
Whenever you change the height of cut, it is recommended to
adjust the height of the anti-scalp rollers.
1. Disengage the blade-control switch (PTO), move the
motion-control levers to the N
and set the parking brake.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the flange nut, anti-scalp roller, and bolt from
the bracket (Figure
Note: Keep the bolt and anti-scalp roller together
when removing.
1
2 3
1. Flange nut
2. Spacer
3. Anti-scalp roller
g024410
Figure 23
3. Height-of-cut positions
4. Pin
-L
EUTRAL OCK
24).
g024312
4
Figure 24
4. Bushing
5. Bolt
4. Align the bolt and anti-scalp roller in the hole of the
bracket that matched the closest height-of-cut position
3
(Figure
5. Insert the bolt into the bracket hole and secure the bolt
4
and anti-scalp roller with the flange nut

Positioning the Seat

The seat can move forward and backward
Position the seat where you have the best control of the
machine and are most comfortable.
position,

Changing the Seat Suspension

The seat is adjustable to provide a smooth and comfortable
ride. Position the seat where you are most comfortable.
To adjust it, turn the knob in front either direction to provide
the best comfort
5
1. Seat-suspension knob
23
24).
Figure 25
(Figure 26).
1
Figure 26
(Figure 24).
(Figure 25).