Premaintenance Procedures; Service-Interval Chart; Raising The Seat; Lubrication - Toro 74891 Operator's Manual

Premaintenance
Procedures

Service-Interval Chart

1. Read the Operator's Manual before performing any
maintenance.
2. Check the engine oil every 8 hours.
3. Check the drive wheel tire pressure every 25 hours.

Raising the Seat

Ensure that the motion-control levers are locked in the
N -L position and lift the seat forward.
EUTRAL OCK
The following components can be accessed by raising the seat:
•
Service decal
•
Fuses
•
Battery and cables
Figure 32
Located on the seat pan underside
4. Check the hydraulic oil every 25 hours.
5. Check the caster wheel tire pressure every 25 hours.
6. Lubricate the caster wheel every 25 hours.

Lubrication

Greasing the Bearings

Service Interval: Every 25 hours—Grease all lubrication
Grease Type: No. 2 lithium grease
1. Park the machine on a level surface and disengage the
2. Move the motion-control levers outward to the
3. Clean the grease fittings
29
points.
blade-control switch.
N -L position, shut off the engine, remove
EUTRAL OCK
the key, and wait for all moving parts to stop before
leaving the operating position.
(Figure 33
a rag.
Note: Make sure to scrape any paint off the front of
the fitting(s).
and Figure 32) with