Menus Related To Taking Pictures; Menus Related To Playback; Other Menus - Panasonic NVGS37EP Operating Instructions Manual

LSQT1005ENG.book 37 ページ ２００５年１２月１６日 金曜日 午後３時１１分

Menus related to taking pictures

ª
[DATE/TIME]
This switches between date and time indications.
≥The movie camera automatically records the
date and time of picture taking on the tape.
≥You can also show or change the date/time
indication by repeatedly pressing the
[DATE/TIME] button on the remote control.
(NV-GS37 only)
ª [AUDIO REC]
Switches the audio (PCM audio) recording
systems.
[12bit]: Records audio in "12 bit 32 kHz 4 tracks".
(The original audio signals can be kept
after the other audio signals are dubbed.)
[16bit]: Records audio in "16 bit 48 kHz 2 tracks".
Audio can be recorded in higher quality.
(If audio signals are dubbed, then the
original audio signals will be erased.)
ª [DISPLAY]
Set to [ON] and the display mode can be switched
to all functions. Set to [OFF] and it can be
switched to minimum display.
ª
[BEEP SOUND]
Set to [ON] and confirmation/alarm beeps are
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
≥
When the unit goes from quick start standby
mode to recording pause
2 Beeps
≥When you pause recording
≥When you turn off the power
≥When the unit goes into quick start standby
mode
2 Beeps for 4 times
≥When a cassette with its erasure prevention tab
set to [SAVE] is inserted, condensation occurs
( ), and at other times. Check the sentence
-44-
displayed on the screen. (
Menu
ª
[OFF]:
[5 MINUTES]: When about 5 minutes passed
≥In the following cases, the power may not turn

Menus related to playback

ª
This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub
[L]:
[R]:

Other menus

ª
When there is a menu that cannot be selected
depending on a combination of functions, set to
[YES] for changing the menu settings back to the
initial shipping condition.
(Language setting cannot be back to the initial
shipping condition.)
ª
)
-39-
If you set to [DEMO MODE] >> [ON] without
inserting a cassette, the movie camera is
automatically set to the demonstration mode for
introducing its functions. If any button is pressed
or operated, the demonstration mode is
cancelled. If no operations take place for approx.
10 minutes, the demonstration mode
automatically starts. To terminate the
demonstration mode, insert a cassette, or set to
[DEMO MODE] >> [OFF]. For normal use, set this
function to [OFF].
[POWER SAVE]
When about 5 minutes passed
without any operation, the standby
mode automatically will be set. In
the standby mode, [;] blinks and
it takes time more than usual to
start recording after you press the
recording start/stop button.
without any operation, the movie
camera automatically turns off to
protect the tape or to prevent the
battery from running down. When
you use the movie camera, turn it
on again.
off even when set [POWER SAVE] >>
[5 MINUTES].
≥When connecting to the AC outlet
(When using the AC adapter)
≥When connecting the USB cable or the DV
cable to a personal computer or other
equipment
[AUDIO OUT]
sound)
Left channel sound (main sound)
Right channel sound (sub sound)
[INITIAL SET]
[DEMO MODE]
37
LSQT1005