Table of Contents
Advertisement
Using the Supplied Software with a Computer
An image stored in the DV Cassette can be transferred to your Personal
Computer.
Mi System Requirements for PHOTOVU LINK & ArcSoft
© iBM PC/AT or compatible.
@ Intel® Pentium® Processor: 266MHz or more
¢ Microsoft Windows®95/98/Me, Windows®2000
@ CD-ROM drive (for installation)
@ Mouse or other pointing device
PHOTOVU LINK:
® RAM: 16 MB or more
@2MB minimum available hard disk space (for installation)
@ 256 color monitor (full color recommended)
® RS-232C serial port (D-Sub 9-pin). An adaptor (D-Sub 9-pin male to a D-
Sub female) is required for a D-Sub 25-pin.
ArcSoft:
¢ RAM: 64 MB or more
© 220 MB minimum available hard disk space (for installation)
® High color (16bit) or more
USB Reader/Writer for SD Memory Card:
¢ Please refer to page 45, regarding the system requirements of USB
Reader/Writer for SD Memory Card.
Wi Connections
1
Connect the Palmcorder to your Computer (Windows) using
the RS-232C PC Connection Cabie (supplied).
e Before connecting the Palmcorder to the Computer, make sure the
Computer is off to insure that images are transferred properly.
2
Turn your Computer on.
3
Set the Palmcorder to VCR Mode.
# For extended periods of use, it is recommended to use the AC Adaptor as a
power source.
® Refer to Computer or Windows operating instructions to identify which COM
port to be used for connection.
Pt
et ed at Peg et Pet Fo Prag Fad Pe Pat Pd Mat at et et Pg Pet Find at tins eins ed fed Med ay Pt Pl Pt Ol Py
Software Installation (windows® 95/98/Me, Windows® 2000)
WT Turn on Computer and start up Windows.
2
Insert supplied CD-ROM into the CD-ROM drive.
e(Setup Menu] @ appears.
3
Select the software to be installed from [Setup Menu].
@PHOTOVU LINK (=> 43):
Software to transfer Image from your Palmcorder to your PC.
*USB Reader/Writer Device Driver ( 45, 46) :
Software for USB Reader/Writer allows you to transfer images directly
off of the memory card into the computer
(Please refer to page 45 to install the driver of tha USB Reader/Writer
for SD Memory Card.)
e ArcSoft software (-> 44):
"Panorama Maker™ 2000", "Photolmpression™ 2000" and
"PhotoPrinter® 2000 Pro" are included .
4
Follow the instructions on the computer screen until the
installation is complete.
¢ Setup window will disappear when the installation is complete.
Note:
If a window does not appear automatically, click the "Start" Button on your
desktop and then click "Run". When the "Run" Box is open, type in
"D:\InstMenu.exe" and click "OK". ("D" applies when the CD-ROM drive is
drive D.)
For assistance, please call : 1-800-211-PANA(7262) or
send e -mail to : consumerproducts
@ panasonic.com
Advertisement
Table of Contents
