Add Ssid Pane - HP xp12000 User Manual

Use the Add SSID and Delete SSID commands to add and delete SSIDs for an existing RCU. When the Add
SSID command is selected, the Add SSID pane appears.
Figure 36

Add SSID pane

The Add SSID pane displays three SSID fields. You can enter up to three SSIDs at one time with the Add
SSID pane. You can add up to four SSIDs (maximum number of SSIDs).
The Cancel button cancels settings you made. The Set button applies settings you made, and changes the
list.
1. From the CU Number/Port tree on the RCU Operation pane, ensure that the correct CU image is
selected.
2. From the MCU/RCU list, click the RCU.
3. To add SSIDs:
a. Right-click, and click Edit SSID(s)&Path(s).
b. Right-click, and click Add SSID. The Add SSID pane appears.
c. Enter new SSIDs in the SSID fields. You can add up to four SSIDs to the RCU.
d. Click Set to add the SSIDs. The list changes to the SSID Settings Parameter list. The added SSIDs are
listed.
NOTE: After being set, options can be modified and canceled (see
deleting settings" on page 77).
4. To delete SSIDs:
a. Right-click, and click Edit SSID(s)&Path(s).
b. Right-click, and click Delete SSID. The list changes to the SSID Settings Parameter list. Only RCUs to
be deleted are listed.
NOTE: After being set, options can be modified and canceled (see
deleting settings" on page 77).
5. Click Apply on the Continuous Access XP main pane to apply settings to the disk array.
Continuous Access XP user guide for the XP12000/XP10000
"Modifying parameters and
"Modifying parameters and
75