This dialog box lets you change data path parameters: the minimum number of paths, RIO MIH,
and Round Trip Time options.
See
"Configure storage systems, define logical paths" (page 38)
Item
Minimum Paths
RIO MIH Time (sec.)
Round Trip Time (ms)
Add Path dialog box
This dialog box lets you configure additional logical paths. See
paths" (page 43)
Item
M-R Path
MCU Port
RCU Port
Add SSID dialog box
102 Continuous Access Synchronous GUI reference
Description
Where minimum number of paths is defined.
Where the time is defined in which the copy operation must complete, otherwise the operation
fails. Options are 10 to 100 seconds.
Where the time limit is defined for data to travel from the P-VOL to the S-VOL.
for complete information.
Description
Where the logical path is defined between local and remote systems.
Where local system initiator port is defined.
Where remote system initiator port is defined.
for complete information.
"Configure additional logical