Viewing Rcu Status (Rcu Status) - HP xp12000 User Manual

• "Adding and deleting SSIDs for RCUs (Add SSID/Delete
Use the RCU Operation pane to perform RCU operations. All operations that can be performed from the
RCU Operation pane have the following common procedure:
1. Click the CU number or Package number in the tree.
2. Click one or more RCUs or Packages in the list. For registering RCU operation, the RCU does not have
to be selected. For this step, the list can be blank.
3. Right-click the list, and perform one of the following:
a. Click MCU&RCU in the Switch Display box to display the following commands:
• RCU Status: Displays RCU status
• RCU Operation: RCU settings operation
• Edit SSID(s)&Path(s): SSID and Path settings operation
When the list is blank, only the RCU Operation command can be activated.
b. Click Port in the Switch Display box to display the following commands:
• Initiator, RCU Target, and Target for fibre
• RCP and LCP for serial (see
4. Click a command. When two or more RCUs are selected in
can be selected.
There is no separate pane for the port change operation. Select the port type, and go to the Volume list
(go to step
5. Click Set. The pane closes, and the MCU/RCU list changes to the RCU Settings Parameter list. Only
RCUs selected in
NOTE:
deleting
6. Click Apply on the Continuous Access XP main pane. Settings are applied to the disk array.
The following sections describe each command and operation in detail.

Viewing RCU Status (RCU Status)

Use the RCU Status command to display RCU status information.
1. In the RCU Operation pane, click MCU&RCU in the Switch Display box.
2. In the CU Number/Port tree, click a CU number that includes the RCU you want to display.
3. From the MCU/RCU list, select an RCU, and right-click.
4. Click RCU Status. The RCU Status pane appears.
64 Continuous Access XP for the XP12000/XP10000
"Port change
6).
step 2 are listed, and items in the list depend on the selected command.
After being set, options can be modified and canceled (see
settings" on page 77).
SSID)" on page 74
operation" on page 76)
step 2, only the RCU Operation command
"Modifying parameters and