Other Operation Pane - HP xp12000 User Manual

• Suspend Operation: Pair suspending operation was performed.
• Pair Suspend (Failure): Pair was suspended because of a failure.
• Pair Resync. Start: Resume pair operation was started.
• Pair Resync. Complete: Resume pair operation was completed.
• VOL: CU number and LDEV number of operated volume.
• Paired VOL: CU number and LDEV number of paired volume.
• Copy Time: Time taken for operation (from start of operation to end). Displayed only for Pairing
Complete and Pair Resync. Complete operations.
NOTE:
Pair Suspend (Failure) rows in the history list does not correspond to number of LDEVs in the LUSE
volume. For LUSE volumes with three or more LDEVs, only two rows showing Pair Suspend (Failure)
are displayed.
• Previous and Next buttons: Displays up to a maximum of 16,384 operations at one time. Use these
buttons to display the previous or next 16,384 operations.
Dates and times displayed on the History pane are the disk array's date and time, which may or may not
correspond to the local time or host time.

Other Operation pane

The Other Operation pane is used to change subsystem option settings.
The Other Operation pane is updated when the tab is switched from one to another, Refresh is clicked,
and settings are applied.
Figure 24

Other Operation pane

The Other Operation pane contains the following items:
• Tree: Used to select the subsystem.
• List: Subsystem setting information.
• Preset List: Settings before you select Apply to change or delete settings. To change or delete settings,
right-click the Preset List.
• Operation: Status of process in progress.
• No Operation
60 Continuous Access XP for the XP12000/XP10000
For Continuous Access XP pairs consisting of LUN Expansion (LUSE) volumes, number of