Rcu Status Pane; Logical Path Status - HP xp12000 User Manual

If you select more than one RCU in
one RCU in step 2 to display status information.
Figure 27

RCU Status pane

• Path list:
• No.: Path number (serial number of the list).
• Path Status: Path status. Normal is displayed when path status is normal.
• RCU S/N: Serial number of RCU.
• SSID: SSID of RCU.
• RCU CU#: CU number of RCU. When you select CU Free, Any appears.
• MCU-RCU Path: Channel type: Fibre or Serial.
• Minimum Paths: Minimum number of paths required for selected RCU connected to the MCU.
• Maximum Initial Copy Activity: Number of concurrent initial copy operations.
• RIO MIH Time: Time value for the remote I/O (RIO) missing interrupt handler (MIH), which is the wait
time until data transfer from the MCU to RCU is complete.
• Path Blockade Watch: Time for monitoring blockade in the Fibre Channel paths on the MCU side.
• RCU Registered: Date and time the RCU was registered.
• Last Updated: Date and time the RCU was last updated.
• Refresh button: Refreshes information displayed on the pane.
• Close button: Closes the pane.
The Path Status field lists the path status. Table 22 describes each status. For troubleshooting information
about MCU-RCU paths, see the Troubleshooting chapter of the HP StorageWorks Command View XP user
guide for XP Disk Arrays or the HP StorageWorks XP Remote Web Console user guide for
XP12000/XP10000.
Table 22

Logical path status

Status description
Normal
Initialization Failed
step 2, only the RCU Operation command can be selected. Select
Condition
Logical path was successfully established and can be used for
copy activities.
Link initialization procedure with the RCU failed because the physical path connection
between the MCU and the RCU or the connection between the MCU and the host was
missing.
Continuous Access XP user guide for the XP12000/XP10000
Continuous Access XP
65