following the internal LDEV you selected
are in a series. When Interval is set, the mapping is done at the specified interval.
Figure 43
Add LU pane (mapping using the Linear button)
• To map one external LU to another internal LDEV:
After automatically mapping the external LU using the Linear button, release the Linear button,
and map the external LU individually
.
Figure 44
Add LU pane (mapping with the Linear button released
6.
If you do not want to automatically set primary and alternate paths, but want to specify paths set as
candidates for primary and alternate paths, click Select Paths. The Select Paths pane appears.
To automatically set alternate paths, go to
7.
Select the path and exclude it from the list of candidates for primary and alternate paths in the Select
Paths pane. For more information, see
8.
Click OK. The Add LU pane appears.
9.
When all settings are complete on the Add LU window, click OK.
76
Configuring external LUs
(Figure
43). The LDEV numbers of the selected XP LDEV
(Figure
44)
step
9.
"Select Paths
pane" on page 74.