Vf User Box; Vf Indicator - Panasonic AJ-PX5000G Operating Instructions Manual

Item
[SAFETY AREA]
[FRAME MARK]
[FRAME SIG]
[FRAME LVL]

[VF USER BOX]

The user box can be displayed as a box-type cursor in any position.
Item
[USER BOX]
[USER BOX WIDTH]
[USER BOX HEIGHT]
[USER BOX H POS]
[USER BOX V POS]

[VF INDICATOR]

Item
[EXTENDER]
[SHUTTER]
[FILTER]
[WHITE]
[GAIN]
[IRIS]
[CAMERA ID]
[ID POSITION]
Chapter 7 Menu Operations — Menu list
Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]...[100%]
f Factory setting: [90%]
Selects frame marker [ON]/[OFF].
[ON], [OFF]
f Factory setting: [OFF]
Sets frame marker aspect ratio.
The [VISTA] is 16:8.65 (1.85:1), and [CNSCO] is 16:6.81 (2.35:1).
[4:3], [13:9], [14:9], [VISTA], [CNSCO]
f Factory setting: [4:3]
Sets the level of the outside of the frame marker.
[0]: Equivalent to signal off (blanking status).
[1]...[14]: Higher numbers indicate increased brightness.
[15]: Same brightness as center.
f Factory setting: [15]
Sets whether to display the user box in the viewfinder.
[ON], [OFF]
f Factory setting: [OFF]
Sets the width of the user box.
[1]...[100]
f Factory setting: [13]
Sets the height of the user box.
[1]...[100]
f Factory setting: [13]
Sets the horizontal position of the center of the user box.
[−50]...[50]
f Factory setting: [0]
Sets the vertical position of the center of the user box.
[−50]...[50]
f Factory setting: [0]
Turns extender display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
Turns shutter speed display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
Turns filter no. display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
Turns [AWB PRE]/[A]/[B] display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
Turns the currently selected gain, [S.GAIN], and [DS.GAIN] displays [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
Selects displays of super iris and super black operation status, and iris value.
[IRIS]: Displays only the iris value.
[S+IRIS]: Displays all.
[S]: Displays super iris and super black operation status.
[OFF]: Does not display.
f Factory setting: [S+IRIS]
Coordinates iris value display and iris override display. When iris override is changed, it is displayed for
three seconds even if [OFF] is set.
Sets whether to record camera ID.
[BAR]: Records camera ID when color bar signals are recorded.
[OFF]: Does not record.
f Factory setting: [BAR]
Sets the location to display camera ID.
[UPPER R]: Upper right
[UPPER L]: Upper left
[LOWER R]: Lower right
[LOWER L]: Lower left
f Factory setting: [UPPER L]
This item cannot be set when [CAMERA ID] is set to [OFF].
– 160 –
Description of settings
Description of settings
Description of settings