Table of Contents
Advertisement
QuickSpecs
Standard Features
Hot Plug LFF SATA
Hot Plug SFF NVMe SSD
Power Supply
HP 500W Flex Slot Platinum Hot Plug Power Supply
One of the following
NOTE: Available in 94% efficiency.
depending on model
HP 800W Flex Slot Platinum Hot Plug Power Supply
NOTE: Available in 94% and 96% efficiency.
NOTE: Also available in -48VDC and 227VAC/380VDC power inputs.
HP 1400W Flex Slot Platinum Plus Hot Plug Power Supply
NOTE: Available in 94% efficiency.
HP Flexible Slot Battery Backup Unit Kits
NOTE: Flex Slot Battery Backup provides 750W output and 500W in paralleled configuration.
HP Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for
hot plug, tool-less installation into HP ProLiant Gen9 Performance Servers. Flex Slot power supplies are
certified for high-efficiency operation and offer multiple power output options, allowing users to "right-
size" a power supply for specific server configurations. This flexibility helps to reduce power waste,
lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper
cord is also included with each standard AC power supply option kit. If a different power cord is required,
please check the
To review the power requirements for your selected system, please use the HP Power Advisor Tool
located at http://www.hp.com/go/hppoweradvisor.
Power specifications and technical content for all HP Server power supplies can be found at
http://www.hp.com/go/proliant/powersupply.
System Fans
One of the following
1P model
depending on model
2P model
NOTE: The second processor option kit contains two fans.
NOTE: High Performance Fan Kit, 766201-B21, is available to meet some extended ambient
operating temperatures above 35° C. Qualifications for extended ambient configurations are
detailed at: https://www.hp.com/servers/ashrae.
Interfaces
Serial
NOTE: Optional kit: 764646-B21.
Video
NOTE: Front VGA options available for 8SFF and 4LFF models as detailed in the core options section
of this QuickSpecs.
Network RJ-45 (Ethernet)
HP iLO Remote Management
Network Port
SD Connector
NOTE: The SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card
into the SD slot while the server is powered.
USB 3.0
32.0TB
3.2TB NVMe + 16TB SFF
ProLiant Power Cables
1
1 rear (Standard)
1 front (Optional)
Both the SFF and LFF Models have an embedded 4x1GB NIC and
a FlexibleLOM bay. (See HP Networking section below for more
details and options).
1Gb Dedicated
1 micro SD Internal
5 total: 2 rear, 1 front, 2 internal
c04375623 – DA – 15033 North America — Version 10 — September 28, 2015
HP ProLiant DL360 Generation9 (Gen9)
2x1.6TB NVMe + 8x2TB SFF
web page.
Non-redundant
N/A
Non-redundant
N/A
4x8TB
Redundant
5 fans
Redundant
7 fans
Page 6
Advertisement
Table of Contents
