Table of Contents
Advertisement
QuickSpecs
Configuration Information - Factory Integrated Models
NOTE: Flex Slot Titanium power supplies support power efficiency of up to 96% and
include a standard C-14 power inlet connector.
HP 800W Flex Slot Universal Hot Plug Power Supply Kit
NOTE: Flex Slot universal power supplies support power efficiency of up to 94% and
support both 277VAC/380VDC power inputs.
HP 800W Flex Slot -48VDC Hot Plug Power Supply Kit
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
HP 1400W Flex Slot Platinum Plus Hot Plug Power Supply Kit
HP 750W Flex Slot Hot Plug Battery Backup Module
NOTE: Flex Slot Battery Backup provides 750W output and 500W in paralleled
configuration.
NOTE: Only 1 Battery Backup module per server, and a Flex Slot Power Supply needed in
parallel.
Step 3: Choose Additional Factory Integratable Options (only one of the following from
each list unless otherwise noted)
HP Storage
NOTE: The embedded B140i controller will be used as the primary controller if no controller has been
Controllers
selected from the list below. Embedded SATA controller can support up to 8 SATA hard drives. Cable kit
may be required.
HP Smart Array Controllers
HP Smart Array P440ar/2GB FBWC 12Gb 2-ports Int FIO SAS Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
HP Smart Array P440/4GB FBWC 12Gb 1-port Int FIO SAS Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives, consumes one PCIe slot.
NOTE:
HP Smart Host Bus Adapters
HP H240ar 12Gb 2-ports Int FIO Smart Host Bus Adapter
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
HP H240 12Gb 2-ports Int FIO Smart Host Bus Adapter
HP Cable Options
HP DL360 Gen9 LFF Smart Array P440ar/H240ar SAS Cable
NOTE: Required with P/N: 749974-B21 or P/N: 749976-B21 if using the HP ProLiant
DL360 Gen9 4LFF CTO Server (P/N: 755259-B21)
HP DL360 Gen9 SFF Embedded SATA Cable
NOTE: Required with the HP ProLiant DL360 Gen9 8SFF CTO Server (P/N: 755258-B21) if
using the embedded B140i as primary controller
HP DL360 Gen9 SFF Smart Array P440/H240 SAS Cable
NOTE: Required with P/N: 761872-B21 or P/N: 761873-B21 if using the HP ProLiant
DL360 Gen9 8SFF CTO Server (P/N: 755258-B21)
HP DL360 Gen9 lFF Smart Array P440/H240 SAS Cable
NOTE: Required with P/N: 761872-B21 or P/N: 761873-B21 if using the HP ProLiant
DL360 Gen9 4lFF CTO Server (P/N: 755259-B21)
BIOS Mode
HP Legacy FIO Mode Setting
NOTE: If selected, then B140i will not be supported and can no longer be a primary
controller therefore, SAS internal controller must be selected to be the primary
controller.
Controller State
HP FIO Enable B140i Setting
Includes the HP Smart Storage Battery
c04375623 – DA – 15033 North America — Version 10 — September 28, 2015
HP ProLiant DL360 Generation9 (Gen9)
720484-B21
720480-B21
720620-B21
738024-B21
749974-B21
761872-B21
749976-B21
761873-B21
766211-B21
766207-B21
775927-B21
775929-B21
758959-B22
784308-B21
Page 21
Advertisement
Table of Contents
