HP ProLiant DL360 Generation9 Quickspecs page 23

Gen9
Hide thumbs Also See for ProLiant DL360 Generation9:
Table of Contents

Advertisement

QuickSpecs
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional information.
HP Unique Options HP DL360 Gen9 2SFF SAS/SATA Universal Media Bay Kit
NOTE: Required when upgrading an 8SFF config to a 10SFF config, not
supported in 4LFF CTO Server; when this option kit is installed it cannot be used in
conjunction with the optical drive or USB 2.0/VGA option kits.
NOTE: Adds 2SFF drives to the 8SFF model for a total of 10SFF SAS/SATA drives.
This kit comes with the cable needed to attach the 2 drives to the internal B140i
SATA controller. For SAS, an alternate storage controller and its associated cable
kit are required.
HP DL360 Gen9 SFF DVD-RW/USB Universal Media Bay Kit
NOTE: DVD RW (Drive Included), USB 2.0, and VGA; when this option kit is installed
it cannot be used in conjunction with the 2 SFF SAS/SATA option kit.
HP DL360 Gen9 SFF USB/VGA Universal Media Bay Kit
NOTE: Front USB 2.0 and VGA, when this option kit is installed it cannot be used in
conjunction with the 2 SFF SAS/SATA option kit.
HP DL360 Gen9 SFF DVD-ROM/USB Universal Media Bay Kit
HP DL360 Gen9 Location Discovery Services Ear Kit
NOTE: Requires ProLiant Location Discovery Services Infrastructure within server
racks.
HP DL360 Gen9 Rear Serial Port and Enablement Kit
HP DL360 Gen9 SFF Systems Insight Display Kit
NOTE: For the 8SFF or 10SFF models, adds a System Insight Display for improved
diagnosis capabilities.
HP DL360 Gen9 LFF USB/VGA Kit
NOTE: Adds front VGA and USB 2.0 ports to LFF.
HP DL360 Gen9 LFF Systems Insight Display Kit
NOTE: For the 8SFF or 10SFF models, adds a System Insight Display for improved
diagnosis capabilities.
NOTE: Options noted with "DL360 Gen9 SFF..." are options only compatible with
the 8 SFF CTO Server; and Options noted with "DL360 Gen9 LFF..." are options
only compatible with the 4LFF CTO Server.
HP DL360 Gen9 High Performance Heat Sink Kit
NOTE: These are included in some higher Watt processors (see processor section),
but may be added to lower power processors to reduce fan power consumption.
HP DL360 Gen9 NVMe 2 Solid State Drive Express Bay Enablement Kit
NOTE: This option provides support for up to 2NVMe drives in SFF only. Adding
NVMe drives replaces support for Universal media bay.
NOTE: The HP DL360 Gen9 High Performance Fan Kit (719079-B21) is required for
combination of NVMe and LRDIMM support.
NOTE: The PCIe card in this enablement kit can only be populated in slot1 of
primary riser or in slot3 of secondary optional FH riser.
HP DL360 Gen9 8SFF (4 NVMe Solid State Drive + 4 SAS/SATA) Express Bay
Enablement Kit
NOTE: This option provides support for up to 4 NVMe drives (drives 5-8).
NOTE: The HP DL360 Gen9 High Performance Fan Kit (719079-B21) is required for
the 4 NVMe + 4 SAS/SATA kit.
NOTE: The PCIe card in this enablement kit can only be populated in slot1 of
primary riser.
HP Processors
Entry Processors - E5-2600v3 series Processors
c04375623 – DA – 15033 North America — Version 10 — September 28, 2015
HP ProLiant DL360 Generation9 (Gen9)
764630-B21
764632-B21
764634-B21
818213-B21
764757-B21
764646-B21
764636-B21
764638-B21
764640-B21
795235-B21
764628-B21
817676-B21
Page 23

Advertisement

Table of Contents
loading

Table of Contents