Advertisement
Quick Links
HP ProLiant DL360 G9 RAID configuration
Use the following procedures to configure the Avaya HP DL360G9 Raid Controller
(P440AR) for Avaya RAID Array configurations.
A monitor and USB keyboard and mouse are required to configure the Raid Controller.
1. Connect a monitor, USB keyboard, and mouse to HP ProLiant DL360 G9 Server.
2. Power up the server.
The system displays the HP DL360G9 hardware boot screen.
November 2015
HP ProLiant DL360 G9 RAID Configuration
1
Advertisement
Related Manuals for HP ProLiant DL360 G9
Summary of Contents for HP ProLiant DL360 G9
- Page 1 (P440AR) for Avaya RAID Array configurations. A monitor and USB keyboard and mouse are required to configure the Raid Controller. 1. Connect a monitor, USB keyboard, and mouse to HP ProLiant DL360 G9 Server. 2. Power up the server. The system displays the HP DL360G9 hardware boot screen.
- Page 2 3. When the system displays the HP Splash screen, press F9 to go to System Utilities. 4. Highlight System Configuration and press Enter to select. November 2015 HP ProLiant DL360 G9 RAID Configuration...
- Page 3 Controller and press Enter. Move cursor to highlight Exit and launch HP Smart Storage Administrator (HPSSA) and press Enter to select. The system loads the HP Smart Storage Tool and displays the Smart Storage Administrator screen. November 2015 HP ProLiant DL360 G9 RAID Configuration...
- Page 4 7. In left column, select Smart Array P440ar. 8. Select the Configure button under Actions. November 2015 HP ProLiant DL360 G9 RAID Configuration...
- Page 5 Select Clear/Confirm and Finish buttons to finalize Clear Configuration job. If the Clear Configuration button is not available move to next step. 10. Select the Create Array button under Actions to initiate Array creation. November 2015 HP ProLiant DL360 G9 RAID Configuration...
- Page 6 12. Select RAID settings according to Avaya application. Generally, settings on this page should be left at default values unless otherwise specified by Avaya application documentation. If the HP default setting does not align with Avaya specified configuration, the RAID Level needs to be changed. Select the Create Logical Drive button to create the Logical (Virtual) Drive.
- Page 7 50 depending on Avaya Application. The system displays following message: Logical (Virtual) Drive was successfully created. 13. Click Finish to exit application or to delete current array and start new Array creation process. November 2015 HP ProLiant DL360 G9 RAID Configuration...
- Page 8 14. Select “X” in upper right corner of screen to Exit Array tool or click the Clear Configuration button to start new array creation process. Once exited from this tool software installation can commence. November 2015 HP ProLiant DL360 G9 RAID Configuration...
- Page 9 Supplementary RAID Array configuration size example screens: 1. Example 2x300GB RAID 1. November 2015 HP ProLiant DL360 G9 RAID Configuration...
- Page 10 2. Example 4x300GB RAID 5. November 2015 HP ProLiant DL360 G9 RAID Configuration...
- Page 11 Example 4x300GB RAID 1 + 0. November 2015 HP ProLiant DL360 G9 RAID Configuration...