HP ProLiant DL360 Generation9 Quickspecs page 45

QuickSpecs
Memory
Memory Subsystem
Each Intel® Xeon® E5-2600v3 family processor socket contains four memory channels per installed
Architecture processor with three DIMMs per channel for a total of twelve (12) DIMMs or a grand total of twenty-four
(24) DIMMs for the server.
Memory Population
guidelines
General Memory Population Rules and Guidelines:
. White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots
only.
. A minimum of one DIMM is required per processor
. Install DIMMs only if the corresponding processor is installed.
. When two processors are installed, balance the DIMMs across the two processors.
. Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel.
Heaviest load
(DIMM with most ranks) within a channel goes furthest from the processor.
. Do not mix RDIMMs or LRDIMMs.
. DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
. The maximum memory speed is a function of the memory type, memory configuration, and processor
model.
. The maximum memory capacity is a function of the memory type and number of installed processors.
. HP memory from previous generation servers is not compatible with the DL360 Gen9 Server.
c04375623 – DA – 15033 North America — Version 10 — September 28, 2015
HP ProLiant DL360 Generation9 (Gen9)
Page 45