HP ProLiant DL360 Generation9 Quickspecs page 18

Gen9

Hide thumbs Also See for ProLiant DL360 Generation9:

Table of Contents

QuickSpecs

Configuration Information - Factory Integrated Models

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are

ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on

configurable product offerings and requirements.

1. Factory Integrated Models must start with a CTO Server.

2. FIO indicates that this option is only available as a factory installable option.

3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives

ordered with the server.

4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.

Step 1: Base Configuration (choose one of the following configurable models)

Model

HP ProLiant DL360 Gen9 4LFF Configure-to-order

SKU Number

Processor

DIMM Slots

Storage Controller

PCIe

Drive Cage

Network Controller

Fans

Management

iLO Management (standard), Intelligent Provisioning (standard), iLO Advanced (optional), Insight Control

USB

Ears

NOTE: 4LFF CTO Server includes 1 SATA Cable, option kit: 766213-B21, which attaches to the B140i controller.

NOTE: 8SFF CTO Server includes two 4 x Mini-SAS Cables, option kit: 766209-B21, which attaches to an optional HP Smart HBA

H240ar or HP Smart Array P440ar controller.

Step 2: Choose Required Options (only one of the following from each list unless otherwise

noted)

HP Processors

Entry Processors- E5-2600v3 series Processors

HP DL360 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO Processor Kit

NOTE: Ships with a standard Heatsink. A Performance Heatsink can be added to help