To Adjust The Lo Setting - Jenn-Air SVD8310S Use And Care Manual

To adjust the Lo setting
1. Light burner and set controlknobfor low flame.
2. Remove controlknobfrom valve stem.
CAUTION: Never use a metal bladeto
pry knoboff.
3. Inserta slender,thin*bladescrewdriver CLOC_'W,SE
TO REDUCE
into the recess at centerof valve stern j_ _LA,ES,ZE
and engagebladewithslot in adjusting
screw.
4. Tumcenterstemadjusting screwslightly
toset flame size. Note: Turnclockwise
COUN?_RCLOCI(WI,gE
to reduce or counterclockwiseto in- TOINCREASEFI'AME
S_ZE
crease flame size. - --
5. Replace controlknobwhenadjustment
is completed.
Properadjustment will producea stable, steadyblueflame of minimumsize. The final
adjustmentshouldbe checked by turning knob from Hi to Lo several times without
extinguishing the flame.
Thisadjustment,at the Lo setting,will automaticallyprovLde the properflame size at
the Med setting.
11