Porsche Boxster Technical Manual page 67

Boxster
Body front
Attention:
Repose
N°
Designation
Nbre
Depose
26
Spacer sleeve 4.8 x 19
4
27
Sheetmetal nuts St4.8
2
28
Sheetmetal screw
4.8 x 19
1
29
Sliding piece
1
30 PVC seam seal
When replacing the wing,
put a PVC seam seal on
the inside of the crimped
seam of the wheel arch.
31
Adhesive tape
1
32
Sheetmetal screw
St.6.3 x 12
3
33
Plastic hinge 1
Insert removal tool (refer
to Workshop Equipment
Manual, Chapter 2.4,
No. 21) at the locking tabs
at the left and right, and lift
via the locking tabs. Shift
the plastic hinge against
the removal tool and
remove from the tank flap
(Item 11).
Position the plastic hinge
on the tank flap (Item 11)
and push on until it is felt
to engage.
5055 19 Removing and installing the wing
Printed in Germany -14, 1997
50 -9
986505