Porsche Boxster Technical Manual page 169

Lids, flaps
Boxster
Note:
INo.
Designation
Qty.
Removal Installation
12
2
Unscrew fastening nut of lid
badge.
Tapping nut
Replace
13
Badge on lid 1
Remove base of lid badge.
Insert base and lid badge
into the lid and fasten
with tapping nut.
14 Base 1
15
1
Emergency operation
mechanism
Pneumatic spring 16
2
4
Press catch in. 17
Catch Press catch out.
18 Rubber grommet
1
19
3
Plug
8.0xllx7.2
3
Loosen hexagon socket
head screw by 4 to 5 turns.
20
Hexagon socket screw
M6 x 25
Sill cover with handle liner
1
21
Screw hexagon socket
screw into the lower sup-
port by 2 to 3 turns.
Position sill cover on the
support and push on.
Tighten M6 x 25 hexagon
socket screws.
Additional assembly
notes on page 55-9
Remove 8.0 x 11 x 7.2
plug (Item 19), undo
M6 x 25 hexagon socket
screw by 4 to 5 turns.
Lever the sill cover up and
out of the lower support
using a plastic spatula.
Check and replace if
necessary.
22 Plastic clip
6
55 22 37 Disassembling and assembling front lid
!~86551 Printed in Germany -10, 1997
~)5 -4