Porsche Boxster Technical Manual page 113

Boxster (986)
Body centre, roof, frame
& Warning!
During body repairs, the following safety instructions and the general information and quality instruc-
tions must be followed. => Rep. Gr. 5; Safety instructions
rn Note!
.The accessories in the repair area should be removed, depending on the extent of the damage.
.All straightening work on the body in this area must have been completed before the damaged parts are
removed.
No.
Procedure Instructions
2
3
Separating spot-welded joints between the
seat cross member and floorpan
Separating spot-welded joints between the
seat cross member and inner member
Separating spot-welded joints between the
seat cross member and inner member
Separate the spot-weld joints between the seat cross
member and the floorpan -A, B- with the spot-weld cutter.
Separate the spot-weld joints -C- between the seat cross
member and inner member with the spot-weld cutter.
Separate the spot-welded joints -D, E, F- between the seat
cross member and inner lower side member with the spot-
weld cutter.
518755 Replacing seat cross member
Printed in Germany -43, 2001
51-6 page 3
a5187551