Porsche Boxster Technical Manual page 192

55
Boxster (986)
Lids, flaps
Electrical plug connection,
lower part of lock
Press the locking tabs on the Connect wiring harness plug
left and right of the wiring har- connection -1-.
ness plug connection -1- and
disconnect.
2
3
Retainer
Bowden cable
1
4A Bowden cable with servo
motor unit
1
48
Bowden cable emergency
operation
1
5
Fastening screws 2
Lower part of lock
Press the bowden cable -3- Press the bowden cable -3-
out of the upper holder -7-. in to the upper holder -7-.
Press or pull the bowden Press the bowden cable with
cable with servo motor unit servo motor unit -4A- in to
-4A- out of the holder -7-. the holder -7-.
Press the bowden cable -48- Press the bowden cable -48-
out of the lower holder -7-. in to the lower holder -7-.
-Note:-
the bowden cable emer-
gency operation is omitted as
of version 4A bowden cable
with servo motor unit
Undo. Screw the lower part of the
lock -6- in place with the
holder -7- and the fastening
screws -5-.
Tightening torque: -10 Nm
(7.5 ftlb.)-
Screw lower part of lock in
place on the holder -7-.
6 1
7 1
1
8
Holder
Kick plate with gripper
~ Rep. Gr. 555737; Disas-
sembling and assembling
release for rear lid.
=> Rep. Gr. 555737; Disas-
sembling and assembling
release for rear lid.
558619 Removing and installing lower part of lid lock at rear
Printed in Germany -37.2000 a5586191
55-19 page 3