Porsche Boxster Technical Manual page 207

Boxster (986)
Lids, flaps
Hexagon-head bolt
2
Cover panel
1
3
4
5-1
Electrical plug connection
Guide for bowden cable
Bowden cable
1
1
1
6
Servo motor for lid opener 1
Undo by 2 turns.
Lift out of the lower part of
the lid lock.
Disconnect.
Pull off.
Disengage nipple of bowden
cable -5-1- and press the
cover out of the lower part of
the lock.
Pull the rubber sleeve
-arrow A- out of the closing
panel.
Extend bowden cable -5-2-
out of the stamp of the servo
motor.
551719 Removing and installing lower part of front lid lock -from model...
Printed in Germany- 39,2000 a5517191
55-22 page 5
Tightening torque: -10 Nm
(7.5 ftlb.)-
Position on lower part of lid
lock.
Connect.
Attach.
Pull the rubber sleeve
-arrow A- in through the
opening of the closing panel.
Press in bowden cable cover
-5-1- and engage the nipple
into the lower part of the
lock.
Insert bowden cable -5-2-
into the stamp of the servo
motor.