Porsche Boxster Technical Manual page 21

Boxster (986)
Body
Safety instructions for roll-over protection system
Remove the roll-over bar modules only after the roll-over
bar has been extended (triggered)!
Safety instructions for plug location plan (body)
The body apertures are sealed with plugs in the factory,
and must be resealed with the plugs provided following
disassembly or repair work!
Safety instructions for water drains (body)
.The water drainage hoses must be blown out carefully
during cleaning using compressed air!
Safety instructions for welding
.The work area must be well ventilated!
.Smoke gases must be removed with a suitable extraction
system! (Refer to Workshop Equipment Manual, Group 5J.
Safety instructions for body repair
Printed in Germany -37.2000
5-1 page 7
a5xxxxl
Danger of injury if roll-over bar is actuated when roll-over
bar module is being removed!
Danger of corrosion and of unwanted water penetration when
removing plugs!
Water drainage hoses can be pushed out or pressed in by
blowing them out of the body during cleaning!
Irritation to respiratory tracts from toxic zinc oxide emitted
when welding galvanized steel!