Porsche Boxster Technical Manual page 22

5
Boxster (986)
Body
Safety instructions for Teromix-6700 two-component
adhl~sive
.The new part must be welded in within 30 minutes!
SafE!ty instructions for hydraulic system
.Do not bend, trap or crush hydraulic lines during installa-
tion!
SafE!ty instructions for hardtop
.The hardtop must be raised evenly on both sides!
.The windstop must be removed before fitting the hardtop!
.~(hen cutting out the rear window, make sure to cut close
to the rear window!
Dam~er of damage to side section if binding time of adhesive
is n~lt observed!!
Dan~~er of damage to hydraulic system if hydraulic lines are
bent, trapped or crushed during installation!
Dam~er of crushing and trapping of components in the case
of intervention in the hardtop mechanism!
Damlage to the hardtop lining and windstop if the procedure
is calrried out incorrectly!
Damage to the rivet connections of the hardtop body if the
rear window is cut out incorrectly!