Table of Contents
Advertisement
When there is a problem with the print settings
Message
"Classification Code is
incorrect."
"Classification Code is
incorrect."
"Duplex Cancelled"
"Exceeded Max. Pages
(Collate)"
"Output Tray Changed"
"Print Overrun"
Messages Displayed When You Use the Printer Function
Cause
The classification code has not
been entered, or the
classification code has been
entered incorrectly.
The classification code is not
supported with the printer
driver.
Duplex printing was canceled.
The number of pages exceeds
the maximum number of sheets
that you can use Collate with.
The output tray was changed
because the paper size of the
specified output tray is limited.
Images were discarded while
printing.
Solution
Enter the correct classification
code.
Select [Optional] for
classification code. For details
about how to specify
classification code settings, see
"Configuring Classification
Codes", Print.
Change the setting for "Apply
Duplex" in [Tray Paper Settings]
to enable duplex printing for the
paper tray. For details about
setting "Apply Duplex", see
"Tray Paper Settings",
Connecting the Machine/
System Settings.
Reduce the number of pages to
print.
Specify the proper output tray.
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver
Help.
171
Advertisement
Table of Contents
