Table of Contents
Advertisement
10. Troubleshooting
Message
"Paper type of n is
mismatched. Select another
tray from the following and
press [Continue]. Paper
type can also be changed
in User Tools."
(A tray name is placed at
n.)
"Parallel I/F board has a
problem."
"Printer font error."
When using direct print from a memory storage device
Message
"Exceeded the limit value for
total data size of the
selected files. Cannot select
more files."
168
Cause
The type of the paper in the tray
does not match the paper type
specified in the printer driver.
An error has occurred in the
IEEE 1284 interface board.
An error has occurred in the
font settings.
Cause
• The size of the selected
file exceeds 1 GB.
• The total size of the
selected files exceeds 1
GB.
Solution
Select a tray containing paper that is
the same type as the specified paper
type.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Contact your service representative.
Solution
Files or groups of files larger than 1 GB
cannot be printed.
• When the total size of the multiple
files that are selected exceeds 1
GB, select files separately.
• When the size of the selected file
exceeds 1 GB, print from a
memory storage device using a
function other than the Direct
printing function.
You cannot select files of different
formats at the same time.
Advertisement
Table of Contents
