Preparing Your Handheld For A Bluetooth Hotsync Operation - Palm Tungsten Tungsten T Handhelds Handbook

In the Serial port drop-down box, select the virtual serial port you chose or
4.
created in step 1.
Click OK.
5.
To prepare your Mac computer for a Bluetooth HotSync operation:
Double-click the HotSync Manager icon in the Palm folder.
1.
In the HotSync Controls tab, select Enabled.
2.
Click the Connection Settings tab, and select the On check box next to bluetooth-
3.
pda-sync-port.
Close the HotSync Software Setup window.
4.

Preparing your handheld for a Bluetooth HotSync operation

There are a few steps you must perform to prepare your handheld for a Bluetooth
HotSync operation.
To prepare your handheld for a Bluetooth HotSync operation:
Create a trusted pair with your computer. See
1.
Chapter 17
Create a connection with your computer. See
2.
in Chapter 17
Tap the Home icon
3.
for details.
for details.
.
Conducting Bluetooth HotSync operations
"Adding trusted devices"
"Creating Bluetooth connections"
in
177