Palm Tungsten Tungsten T Handhelds Handbook page 224

Chapter 17 Setting Preferences for Your Handheld
Creating Bluetooth connections
You can use the Connection Preferences screen to create connections to the
following types of Bluetooth-enabled devices:
GSM mobile phones (See
for information on connecting to other mobile phones.)
Computers
LAN access points
High-speed wireless data networks [such as a General Packet Radio Service
(GPRS) network]
High-speed wireless data networks provide an "always on" network connectivity
and high-speed wireless data transmission. To connect to a high-speed wireless
data network, you must have a GSM mobile phone, the correct driver for your
phone, a subscription to high-speed wireless data network services with your
mobile phone carrier, and the correct high-speed wireless data network settings
for your carrier.
You can also create a connection with a GSM phone using the Phone Link
TIP
application. We recommend using Phone Link to create phone connections. See
Chapter 12
to create a connection with Phone Link.
To create a Bluetooth to LAN connection:
From the Communications Preferences screen, select Connection.
1.
Tap New.
2.
Tap here
Enter a name for the connection, such as BT to LAN.
3.
Tap the Connect to pick list and select Local Network.
4.
Tap the Via pick list and select Bluetooth.
5.
Make sure the network access point is ready to accept a Bluetooth connection.
6.
214
"Connecting to non-GSM phones"
for details. Use the steps described in these sections only if you are unable
later in this chapter