Conducting Bluetooth Hotsync Operations; Preparing Your Computer For A Bluetooth Hotsync Operation - Palm Tungsten Tungsten T Handhelds Handbook

Chapter 16 Performing HotSync

Conducting Bluetooth HotSync operations

If you have a Bluetooth-enabled computer running Windows 98/2000 or
Mac OS X, version 10.1.2 or later with the Apple Bluetooth software, you can use
Bluetooth technology to perform wireless HotSync operations.
NOTE
compatibility with other versions of the Windows operating system.

Preparing your computer for a Bluetooth HotSync operation

There are a few steps you must perform to prepare your computer for a Bluetooth
HotSync operation.
To prepare your Windows computer for a Bluetooth HotSync operation:
Use the Bluetooth setup software on your computer to open or create a virtual
1.
serial port for Bluetooth communication. See the documentation included with
your computer for instructions on changing port settings or configuring the
Bluetooth serial host.
Click the HotSync Manager icon
2.
select Setup.
Click the Local tab.
3.
176
® Operations
Go to the web site www.palm.com/support for additional information on
in the Windows system tray, and then
Click the HotSync Manager icon
Select the port from the
drop-down list