Palm Tungsten Tungsten T Handhelds Handbook page 234

Chapter 17 Setting Preferences for Your Handheld
To close a connection:
From the Communications Preferences screen, select Network.
1.
Tap Disconnect to terminate the connection between your handheld and your
2.
service.
Tap Done.
3.
LAN access points
A LAN access point enabled with Bluetooth technology provides an entry point
into a local area network. You can log onto these networks from your handheld to
access services such as e-mail and the Internet.
LAN access points can be located in private, corporate or in public areas. In some
cases there may be a fee to use a LAN access point. To access a LAN access point
from your handheld, you must set your Network Preferences as described in the
sections that follow.
Accessing the Internet with a Bluetooth phone or LAN access point
With your handheld's built-in Bluetooth technology, you can connect to the
Internet using a Bluetooth-enabled mobile phone or a LAN access point. To
connect to a Bluetooth-enabled mobile phone or LAN access point, you must be
within range of these devices. If you have a GSM mobile phone and subscribe to
high-speed wireless data services with your mobile phone carrier, you can use
these services to connect to the Internet when you are within range of the high-
speed wireless data network.
You can also configure Internet access with a GSM phone or high-speed wireless
data network using the Phone Link application. We recommend using Phone Link
to enter these settings. See
details. Use the steps described in this section only if you are unable to create a
connection with Phone Link and you have already used the Connection
Preferences screen to create a trusted pair for your phone, high-speed data
network, or LAN access point. See
chapter for additional information.
To configure Internet access with a Bluetooth phone or LAN access point:
From the Communications Preferences screen, select Network.
1.
Tap the Service pick list and select the name of your ISP or network service. See
2.
"To select a network service profile:"
If the name of your service does not appear on the list, see
information to a network service profile"
adding an item to the Service pick list.
224
"Setting up a phone connection"
"Creating Bluetooth connections"
earlier in this chapter for details.
later in this chapter for information on
in Chapter 12 for
earlier in this
"Adding detailed