Creating A Voice Memo; Recording A Voice Memo - Palm Tungsten Tungsten T Handhelds Handbook

Chapter 14 Using Voice Memo

Creating a voice memo

To record a voice memo, you can use the Voice Memo application button or the
onscreen controls. To pause and resume while recording a voice memo, you must
use the onscreen controls. After you finish recording a voice memo, you cannot
add to or change the content, but you can assign the voice memo to a category or
change the voice memo title.
To conserve storage space on your handheld, you can also store your voice memos
on an expansion card.

Recording a voice memo

This section covers how to record a voice memo using the Voice Memo application
button.
To record a voice memo on your handheld:
Press and hold the Voice Memo application button
1.
IMPORTANT
recording. If you are recording a long voice memo and don't want to continue
holding the Voice Memo application button, see
memo recording"
controls. For optimum results, hold your handheld within 30 centimeters
(approximately 1 foot) of your face while recording.
A tone sounds to indicate that recording has started.
Face your handheld and begin speaking.
2.
Release the Voice Memo application button to stop recording.
3.
A tone sounds to indicate that recording has stopped.
(Optional) Select the time at the top of the screen and enter a title.
4.
140
Continue holding the Voice Memo application button until you finish
later in this chapter to make a recording with the onscreen
.
"Pausing and resuming a voice