Performing A Wireless Network Hotsync Operation - Palm Tungsten C Handbook

If your user name does not appear, click New, enter your user name and
5.
click OK.
Click OK.
6.
Perform one of the following:
7.
– Put your handheld in the cradle/cable, and perform a HotSync operation.
The HotSync operation records network information about your computer
on your handheld. With this information, your handheld can locate your
computer when you perform a HotSync operation over the network. You are
ready to perform a network HotSync.
– Perform a network HotSync operation. You will need to go through a setup
procedure on your handheld.

Performing a wireless network HotSync operation

After you prepare your computer and select your Conduit Setup options, you are
ready to perform a wireless network HotSync operation.
IMPORTANT
Tungsten C handheld before your attempt a network HotSync operation. Your
computer must have the software installed to communicate with your handheld.
If you already performed a cradle/cable HotSync operation, you are ready for
network HotSync operation with no further preparation needed.
If you did not perform a cradle/cable HotSync operation, you must set up from
your handheld.
To perform a wireless network HotSync operation:
Press Home
1.
Tap the HotSync icon
2.
DRAFT Palm, Inc. Confidential
You must first install the Palm Desktop software that came with your
.
.
Conducting network HotSync operations
299