Beaming Tips - Palm Tungsten Tungsten T Handhelds Handbook

Chapter 3 Entering Data on Your Handheld
To beam an application:
Open the Applications Launcher.
1.
Tap the Menu icon
2.
Tap App, and then tap Beam.
3.
Tap the Beam From pick list.
4.
Select either Handheld or Card.
5.
Tap the application you want to transfer.
6.
Some applications are copy-protected and cannot be beamed. These are listed
with a lock icon next to them.
Tap Beam.
7 .
When the Beam Status dialog box appears, point the IR port directly at the IR
8.
port of the receiving device.
Wait for the Beam Status dialog box to indicate that the transfer is complete
9.
before you continue working on your handheld.
To receive beamed information:
Turn on your handheld.
1.
Point the IR port directly at the IR port of the transmitting device to open the
2.
Beam dialog box.
(Optional.) Tap the category pick list and select a category for the incoming
3.
information. You can also create a new category or leave the information
unfiled.
Tap Yes.
4.

Beaming tips

You can set the full-screen pen stroke to beam the current entry. See
preferences"
You can draw the Graffiti Command stroke to activate the Command toolbar,
and then tap the beam icon.
You can use the Graffiti Command stroke "/ B" to beam the current entry.
32
.
in Chapter 17 for more information.
"Pen