Palm Tungsten Tungsten T Handhelds Handbook page 173

If you are a system administrator preparing several handhelds for a group of users,
you may want to create a user profile. See
chapter before performing the following steps.
You must perform your first HotSync operation with a local, direct
IMPORTANT
connection or with infrared communication, rather than with a modem or network.
The following steps assume that you have already installed Palm Desktop
software. If you have not installed this software, see
Chapter 1 for instructions.
To perform a local HotSync operation on a Windows computer:
Place your handheld in the cradle/cable.
1.
If the HotSync Manager is not running, start it: On the Windows desktop, click
2.
Start, and then select Programs. Navigate to the Palm Desktop software
program group, and select HotSync Manager. Alternatively, you can start the
Palm Desktop software, which automatically opens the HotSync Manager.
Conducting cradle/cable HotSync operations
"Creating a user profile"
"Step 4: Install software"
later in this
in
163