Performing A Bluetooth Hotsync Operation; Conducting Network Hotsync Operations - Palm Tungsten Tungsten T Handhelds Handbook

Chapter 16 Performing HotSync
Select the HotSync icon
4.
Tap the pick list in the center of the screen and select the connection settings you
5.
just created.

Performing a Bluetooth HotSync operation

After you prepare your computer and your handheld, you are ready to perform a
Bluetooth HotSync operation.
To perform a Bluetooth HotSync operation:
Tap the Home icon
1.
Select the HotSync icon
2.
Tap the HotSync icon in the center of the screen.
3.

Conducting network HotSync operations

When you use the network HotSync technology, you can take advantage of the
LAN and WAN connectivity available in many office environments. Network
HotSync technology enables you to perform a HotSync operation by using
Bluetooth technology or an 802.11 accessory to make a wireless connection to a
network, by dialing in to a network, or by using a cradle/cable that is connected to
any computer on your LAN or WAN (provided that the computer connected to the
cradle/cable also has the network HotSync technology installed, your computer is
on, and the HotSync Manager is running). Network HotSync technology is
available only on Windows computers.
IMPORTANT
connection or infrared communication. After that, you can perform a network
HotSync operation.
178
® Operations
.
.
.
You must perform the first HotSync operation by using a local, direct