Press and hold the "DISP" button
5
after selecting the "EXIT" by
pressing the "DISP" button.
The display goes back to step
System check display
■
After turning the engine switch to IGNITION ON mode, "SYSTEM CHECK" is dis-
played while system operation is checked.
Tire inflation pressure
■
It may take a few minutes to display the tire inflation pressure after the engine
●
switch is turned to IGNITION ON mode. It may also take a few minutes to display
the tire inflation pressure after inflation pressure has been adjusted.
"---" may be displayed if the tire position information cannot be determined due to
●
unfavorable radio wave conditions.
Tire inflation pressure changes with temperature. The displayed values may also be
●
different from the values measured using a tire pressure gauge.
When disconnecting and reconnecting battery terminals
■
The following information data will be reset:
Driving range
●
Average fuel consumption
●
Average fuel consumption after refueling
●
Distance after refueling
●
Elapsed time
●
Average vehicle speed
●
Liquid crystal display
■
Small spots or light spots may appear on the display. This phenomenon is character-
istic of liquid crystal displays, and there is no problem continuing to use the display.
Customization
■
Setting of available languages can be changed. (Customizable features P. 865)
LS460/LS460L_U (OM50D48U)
2. Instrument cluster
.
1
99
2