Lexus LS460 User Manual page 597

Hide thumbs Also See for LS460:

Table of Contents

5-6. Using the hands-free phone system (for cellular phone)

Compatible models

This system supports the following service.

• HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.5 or higher)

• OPP (Object Push Profile) Ver. 1.1 or higher

• PBAP (Phone Book Access Profile) Ver. 1.0 or higher

• MAP (Message Access Profile) Ver. 1.0 or higher

• SPP (Serial Port Profile) Ver. 1.1 or higher

: This profile is necessary when using Apps. For details, refer to the "Navigation

System Owner' s Manual".

If your cellular phone does not support HFP, you cannot enter the Bluetooth

phone, and take OPP, PBAP, MAP or SPP service individually.

If the connected Bluetooth

patible, this function may not be used.

Please go to http://www.lexus.com/MobileLink to find approved Bluetooth

phones for this system.

Certification

FCC ID: AJDK053

This equipment complies with FCC radiation exposure limits set forth for an uncon-

trolled environment and meets the FCC radio frequency (RF) Exposure Guidelines

in Supplement C to OET65. This equipment has very low levels of RF energy that it

deemed to comply without maximum permissive exposure evaluation (MPE). But it is

desirable that it should be installed and operated keeping the radiator at least 20 cm

or more away from person' s body (excluding extremities: hands, wrists, feet and

This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter.

This device complies with part 15 of the FCC Rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

LS460/LS460L_U (OM50D48U)

Specification Ver. 1.1 or higher (Recommended: Ver. 2.1+EDR or

phone version is older than recommended or incom-