5-6. Using the hands-free phone system (for cellular phone)
Call waiting
■
When a connected call is interrupted by the third party, the incoming
call message will be displayed.
To talk with the other party: Select
●
wheel.
To refuse the call: Select
●
Every time you select
call is interrupted, you will be switched to the other party.
If your cellular phone is not accepted in HFP Ver. 1.5, this function can-
not be used.
The ring tone that has been set in the "Phone Sound Settings" screen
sounds when there is an incoming call. Depending on the type of
Bluetooth
simultaneously when there is an incoming call. (P. 621)
Transferring calls
■
It is not possible to transfer from hands-free to a cellular phone while driving.
●
If you transfer from a cellular phone to hands-free, the hands-free screen will be
●
displayed, and you can operate the system using the screen.
Transfer method and operation may vary according to the cellular phone used.
●
For operation of the cellular phone in use, see the phone' s manual.
●
Repeated tone symbols
■
When the "p" pause tone is used, after waiting 2 seconds the tone data up until the
next pause tone will be automatically sent. When the "w" pause tone is used, the tone
data up until the next pause tone will be automatically sent after user operation.
While driving
■
Key input is unavailable.
Voice recognition during a call
■
"Send Tones" can be operated by voice recognition. (P. 381)
Interrupt call operation
■
Interrupt call operation may differ from depending on your phone company and the
cellular phone.
LS460/LS460L_U (OM50D48U)
or press
phone, both the system and Bluetooth
®
or press
or press
on the steering wheel.
on the steering wheel after a
phone may sound
®
617
on the steering
5