Disabling the seat return function
Pressing the "C" button will disable
the seat position recall or seat
return function.
The indicator light comes on when the
function is disabled.
Pressing the button again will enable
the seat position recall or seat return
function.
Seat return function linked to the door opening operation
■
Operating conditions
●
The engine switch is in IGNITION ON mode.
Canceling operation partway through
●
During the seat return operation, performing either of the following actions cancels
the operation:
• Pressing the "SET", "M" or "C" button
• Pressing any of the seat adjustment switches
Seat return operation after turning the engine switch off
●
The seat will automatically return to the neutral position if the door is opened within
approximately 45 seconds of the engine switch being turned off.
CAUTION
Seat adjustment caution
■
Take care during seat adjustment so that the rear passengers do not strike the front
seats.
LS460/LS460L_U (OM50D48U)
3-3. Adjusting the seats
163
3