Lexus LS460 User Manual page 711

Hide thumbs Also See for LS460:

Table of Contents

5-9. Other interior features

Test the HomeLink

by pressing the newly pro-

grammed button.

If a HomeLink

programmed for a garage door,

check to see if the garage door

opens and closes. If the garage

door does not operate, see if your

remote control transmitter is of

the rolling code type. Press and

control transmitter is of the rolling

code type if the HomeLink

cator light flashes rapidly for 2

seconds and then remains lit. If

your transmitter is of the rolling

code type, proceed to the head-

ing "Programming a rolling code

Repeat the steps above to program another device for each of the

remaining HomeLink

Programming a Rolling Code system (for U.S.A. owners)

If your device is Rolling Code equipped, follow the steps under the

heading "Programming the HomeLink

steps listed below.

Locate the learn button on the ceiling mounted garage door opener

motor. The exact location and color of the button may vary by brand

of garage door opener motor.

Refer to the operation manual supplied with the garage door opener for the

location of the learn button.

Press the learn button.

Following this step, you have 30 seconds in which to initiate step 3 below.

button has been

button. The remote

" before proceeding with the