Installing towing eyelet
Take out the towing eyelet (P. 812)
1
Remove the eyelet cover using a
2
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the
3
hole and tighten partially by hand.
Tighten down the towing eyelet
4
securely using a wheel nut
wrench.
LS460/LS460L_U (OM50D48U)
7-2. Steps to take in an emergency
791
7