When any part of the vehicle sags
●
When any part of the vehicle
sags due to the number of pas-
sengers or the distribution of
the load, there is a margin of
error between the guide lines
on the screen and the actual
distance/course on the road.
When approaching three-dimensional objects
■
It is not possible to determine the position of three-dimensional objects
(such as vehicles) using the vehicle width extension guide lines and dis-
tance guide lines. When approaching a three-dimensional object that
extends outward (such as the flatbed of a truck), be careful of the fol-
lowing.
Vehicle width extension guide lines
●
Visually check the surround-
ings and the area behind the
vehicle. In the case shown in
the illustration, the truck
appears to be outside of the
vehicle width extension guide
lines and the vehicle does not
look as if it hits the truck. How-
ever, the rear body of the truck
may actually cross over the
vehicle width extension guide
lines. In reality if you back up as
guided by the vehicle width
extension guide lines, the vehi-
cle may hit the truck.
LS460/LS460L_U (OM50D48U)
4-5. Using the driving support systems
A margin of error
291
4